Set up EdgePro
Install, unlock and get the most out of every ride.
Install and unlock in 90 seconds
Install
- On your phone, open the Connect IQ app and make sure your Edge is selected.
- Search for EdgePro and tap Install. You can also use the store page.
- Sync your Edge with the Garmin Connect app. EdgePro is copied to the Edge on the next sync.
EdgePro works on Edge 1060, 1050, 1040, 1030 (also Plus and Bontrager), 850, 840, 550, 540 and Explore 2. Use the 7-day trial to check it on your Edge before you buy.
Devices
Every supported Edge gets the same pages and settings. Smaller and older models get a version made for their screen and memory:
| Edge | What you get |
|---|---|
| Edge 1060, 1050, 850, 550 | Everything, on a full-color screen. |
| Edge 1040 | Everything. The 64-color screen shows the zone colors a little simpler. |
| Edge Explore 2 | Like the Edge 1040, but no Workout page: the Explore 2 itself does not run structured workouts. |
| Edge 840 | Everything, in the same design as the bigger Edges, sized for the smaller screen with Garmin's own fonts. No FTP % above the main number. |
| Edge 540 | Same as the Edge 840. Because the Edge 540 has no touchscreen, the pages change by themselves every 10 seconds while you ride, and the main number is set in Settings. |
| Edge 1030, 1030 Plus, 1030 Bontrager | No Weather page; the Wind field uses the Edge's own forecast. No radar field. The Bike page shows gears without the shifting and power meter batteries. No next-step pop-up during workouts (the beep and the NEXT line stay). Garmin's own fonts. To unlock, enter the unlock code from the unlock page in the Connect IQ app (EdgePro › Settings › License and trial › Unlock code); the 1030 can't check in online by itself. |
What you need
- Weather page and wind: your phone with the Garmin Connect app, or the Edge's own forecast.
- Bike page: Shimano Di2, SRAM AXS or eTap paired with the Edge. Left/right balance needs a dual-sided ANT+ power meter.
- Workout page: a structured workout started on the Edge (not available on the Explore 2).
- Power pages and zones: a power meter. Without one, EdgePro shows speed and heart rate.
- Unlocking: your phone with the Garmin Connect app, once.
Add it to a data screen
EdgePro is a data field that fills the whole screen, so it goes on a data screen with a single field.
- On the Edge, open the activity profile you ride with (for example Road) and go to Data Screens.
- Add a new data screen, or edit an existing one, and choose the one-field layout.
- Select the field, go to Connect IQ and choose EdgePro.
- Move the screen to the first place if you want to see EdgePro when you start riding.
The exact menu names differ a little between Edge models. On touch models you can also long-press the field during a ride to change it.
Getting around
| Tap | What happens |
|---|---|
| Big number at the top | Switches between power, speed and heart rate (choose which ones in Settings). |
| Left or right side of the lower half | Previous or next page. |
| Status bar (clock and battery) | Switches between the dark and light theme. |
| Lap button | Starts a new lap. The Lap page compares it with the previous one. |
Without a power meter, the big number shows speed. The colored chip and the column next to it show your current zone.
The pages
Ride
Power, speed and heart rate in big numbers, with your zone in color and four tiles you choose: time, distance, wind, cadence and more.Effort
The last 10 minutes of power as a colored tape, W′ balance, and the current climb with its profile, grade, VAM and meters climbed.Weather
Tailwind, headwind or crosswind relative to where you ride, gusts, rain chance and the next six hours.Lap
Lap time, power, speed and distance, each compared with your previous lap.Analysis
Time in zones, best power for 5 s, 1, 5 and 20 minutes, NP, TSS, climbing and work.Body
Carbs and fat burned from your power, how much to eat and drink per hour with an eat reminder, and CORE body temperature with heat strain when a CORE sensor is paired.Workout
Shows up by itself during a structured workout: the target in big numbers, push or ease, time in target and the next step.Bike
Shows up when Di2, AXS or eTap is paired: gear, drivetrain with cross-chain warning, left/right balance and batteries.Workouts
Start a structured workout on the Edge as usual. EdgePro adds the Workout page and shows it by itself: the target range in big numbers, whether to push or ease, time in target and the next step.
In the last 5, 10 or 15 seconds of a step, the next target appears on every page, as a popup at the bottom or over the whole page, with a short beep. You can change the timing, the style and the beep in Settings. The beep follows the Edge's system tones.
Settings
Open the Connect IQ app on your phone, go to My Device Apps (or the Edge's Connect IQ apps), choose EdgePro and tap Settings. Changes reach the Edge with the next sync.
- Main number: which values to switch between, which one comes first, and power smoothing (3, 10 or 30 s).
- Pages: turn each page on or off and choose the values shown on it.
- Workout page: next step alert timing (off, 5, 10 or 15 s), popup or full page, and the beep.
- Body page: eat reminder (every 200/300/400 kJ or 15/20/30 min), bottle size and carb target per hour.
- Power zones and FTP: use the FTP from your Edge user profile, or set it manually; W′ for the W′ balance.
- Display: dark, light, follow the device, or by daylight; color the main number in the light theme.
- Gears field: teeth (50:14), gear number (22) or rear gear (4/12).
- Radar margin: when a Varia radar sees a vehicle, the layout narrows on both sides so Garmin's radar bar doesn't cover your numbers. The radar must be paired with the Edge over ANT+.
Weather and wind
Weather comes from Open-Meteo through your phone, from the Edge's own forecast, or both, as you choose in Settings. Keep the Garmin Connect app running on your phone. Without a connection, wind and weather show "--".
The wind compass shows where the wind is blowing relative to your riding direction: green is a tailwind, red a headwind and yellow a crosswind. Wind speed follows the Edge's units (km/h or mph); for m/s pick a "wind in m/s" option under Weather source.
Trial and unlocking
Every feature works for 7 days. During the trial, a short message at the bottom of the screen shows the days left and your device code: a few seconds after you open EdgePro. In the last 3 days it also comes back every hour, and every 30 minutes in the last 2 days.
- Tap the message on the Edge. A notification with a link arrives on your phone.
- Open the link, or go to the unlock page and enter your device code.
- Pay 4.99 € once. Your Edge unlocks by itself the next time it connects to your phone.
No phone nearby? The unlock page shows an unlock code. Enter it in the Connect IQ app under EdgePro › Settings › License and trial › Unlock code. After the trial, your rides keep recording normally even if EdgePro is locked.
Riding with EdgePro? Tag @edgepro.bikeWe share the best rider setups on Instagram.Troubleshooting
EdgePro doesn't appear in the Connect IQ list on the Edge
Sync the Edge with the Garmin Connect app and check in the Connect IQ app that EdgePro is installed on this Edge.
My settings don't change anything
Settings reach the Edge with a sync. Leave the activity profile and open it again so EdgePro reloads them.
Wind and weather show "--"
Your phone needs to be connected with the Garmin Connect app running. You can also switch the weather source to the Edge's forecast in Settings.
The Workout page doesn't show
It appears only while a structured workout is running on the Edge. Start one under Training › Workouts (for example synced from Garmin Connect or TrainingPeaks). Connecting a smart trainer or riding freely on it doesn't open the page. With the trainer paired, the Edge sets the resistance and EdgePro shows the targets. The page goes away when the workout ends. The Edge Explore 2 doesn't run structured workouts, so it has no Workout page.
The Body page shows temperature and W' balance instead of CORE
CORE body temperature and heat strain appear when a CORE sensor is paired with the Edge and a CORE field is selected on any page (for example a Ride tile). Without that, the page shows the air temperature and W' balance. Carbs and fat come from your power meter, or from heart rate without one.
The Bike page doesn't show
It appears when the Edge receives gear data from paired Di2, AXS or eTap shifting. Check that the shifting is paired as a sensor on the Edge and that "Show page / position" in the Bike settings is not Off.
Radar margin or the Radar field does nothing
Both need the radar paired with the Edge over ANT+. Over secure Bluetooth, Garmin doesn't pass radar data to Connect IQ apps. Remove the radar from the Edge's sensors and pair it again over ANT+.
I see "IQ!" instead of EdgePro
Update the Edge firmware and reinstall EdgePro from the Connect IQ app. If it keeps happening, write to us at support@edgepro.bike with your Edge model.